Simulate the damage of natural water (rain, seawater, river water,
etc.) to products and materials, vertical rain drip tester is to
test the physical and other related properties of the products in
the environment of simulated rain, such as electronic and
electrical products, lamps, electrical cabinets, electrical
components, automobiles, motorcycles and their parts and
components.
Standard :
IEC60529:1989 +A1:1999 +A2:2013.
GB/T4208-2017 Housing Protection Rating (IP Code) 14.2.1, 14.2.2
and Figure 3.
GB7000.1 Lamps Part I: General Requirements and Trials 9.2.3.
Features:
1. Suitable for product IPX3, IPX4 waterproof testing
2. Double column structure, easy to install, swing pipe rotation
smooth.
3. The chassis is equipped with a water storage tank, which
automatically controls the water intake and prevents damage to the
machine due to lack of water.
4. The use of high-quality servo motor, low noise, swing speed,
angle more accurate..
5. Sample loading table using stepper motor, rotation speed and
standard angle can be controlled by touch screen.
6. Touch control function for IPX3 testing, IPX4 testing, customization: you can set the test time, rain angle, swing speed, turntable
speed.
7. sample turntable: US304 stainless steel plate processing and
manufacturing.
8. The power-off time of the sample power supply can be controlled
by the program: power failure (0-999 min) - power on (0-999min) -
power failure (0-999min), suitable for samples in the test need to
power off.
9. Column structure, equipment running smoothly, the main frame can
be packaged as a whole, convenient transportation, saving
installation time.
10. The test chamber is equipped with a sample power outlet
(standard AC220, 10A; can be customized on demand), then sample can
be tested live.
Technical parameters :
| Apply to the product | IPX3, IPX4 test |
| Tube size | R1000 mm |
| Spray hole size | Dia 0.4mm |
| Tube inner diameter | 15 mm |
| Sample turntable’s diameter | Dia 800 mm |
| |
| Flow | IPX3=2.9L/min±5%；IPX4=4.3L/min±5% |
| Turntable height adjustable range | 1300-1700mm |
| Turntable speed | 1-5r/min adjust |
| The turntable rotates | Always turn forward / forward reverse alternately |
| Turntable loads | 50kg |
| Tube angle | 120º (IPX3), 350º (IPX4), or custom settings |
| Swing speed | 4s’ - 240 degrees, 12s’ -720 degrees (precise control) or custom
settings |
| |
| Safety protection | Leakage protection, water shortage protection, short-circuit
protection |
| Dimensions | 2850*2020*2350 mm |
| power supply | AC220V±10% ；50Hz ,1.0kw, Fire line+zero line+protective ground
line(Resistance＜4Ω) |
| Sample load power supply | AC220V±10% ；50Hz |
Terms of use :
| Environmental requirements | Ground is flat, drainage is smooth, the ground and walls are
waterproof, setting ground leakage or drainage ditches. Well ventilated. No strong electromagnetic field around. No flammable, non-explosive, non-corrosive substances and dust
around . |
| Temperature | 5℃～35℃ |
| Humidity | ≤85% |
| Atmospheric pressure | 86kPa～106kPa |
| Power supply conditions | Install the appropriate capacity of the leakage protection air
switch for the device, the switch must be used independently of the
device. Do not use the knife-switch or power outlet. Distance is no more than 2m from the air switch of creepage and
equipment . |
| Water conditions | The water pressure is not less than 0.2Mpa and a 4-point tap is
installed. The tap is no more than 2 meters away from the device. |
Accessories:
1. Filter element: 1pcs;
2. Test needles: 100 pcs;
